EGE 26 T Features:
Length overall : 8.00 m.
Machine (optional) : 4 or 5 hp. Outboard
Length of waterline : 7.50 m
Berths : 4 person
Beam : 2,50m.
Black water tanks(optional) : 40 lt.
Draft : 1,75 m.
Sail Area : 35 m2
Displacement : 1500 kg.
Spinnaker : 62.00 m2
Ballast (Lead) : 660 kg. .
• One manual bilge pump operated from cockpit
• Reinforced polyester rudder on transom with stainless
Ballast : The keel is from lead with antimony 660 kg.
torpedo shaped bottom, keel bolts are stainless steel.
Rudder : Glass fibre rudder on transom with stainles stell
fitting and Laminated wood tiller
Chain plates : Stainless steel fixed on the deck.
Varnished cabin sole, mahogany with ashtree inlaid wood
Forward: Double berth , stowage under the berth
Toilet compartment : GRP wash unit.
Aft : Separated two berths. Stowage under the berth .
DECK EQUIPMENT :
-1 hatches , size 40 x 40
-3 x B16.2A Harken winches
-4 Aluminum mooring bollards,
-1 main sheet track with slider and tag lines.
-2 genoa sheet track with slider and tag lines.
-Navigation lights on top of the mast.
-25 mm. dia. Stainless steel pullpit, pushpit.
INTERIOR EQUIPMENT :
Toilet installation : Hand operated marine toilet with sea
water in take and outlet through ball valves.
Waste holding tank is optional.
Cushions : Cushions in high quality foam with artificial
Electrical installation : Four breaker electrical panel, 1
spotlight in main cabin, 1 x 60 amp.hrs marine batteries.
OUTBOARD ENGINE INSTALLATION (optional):
Engine : 4 Hp or 5 Hp. Outboard machine.
MAST AND RIGGING :
Main mast : Selden brand mast with two levels of spreaders,
boom and cenoa furler.
Standing rigging : All stays and shrouds in stainles steel
Running rigging : 1 main halyard, 1 cenoa halyard, 1 main
sheet, 2 jib sheets.
Sails : 1 main sail, 1 furling genoa , sail bags.