main page  dealers press news profile our product

download

2nd hand

EGE 40  

Length overall        :   12,35 m.                            Hull length               : 11,98 m.

Beam                          : 3,90 m.                                  Draft                           : 1,90 m.

Displacement         :   7,500 kg.                            Ballast                        : 2,800 kg.

Berths                        : 6-8 persons.                       Sail areas                  : 85,40 m2.

Engine                        : 53 Hp. Saildrive

 

General description:

Handmade solid laminate fibreglass mat and rowing. Deck: moulded fibreglass with sandwiched, stress areas where winches, sheet tracks, etc. are reinforced by using backing stainless steel plates.

1 or 2 aft cabins with large wardrobe and stowage, separate large toilet/shower cabin.

L-shaped kitchen.

1 front cabin.

In saloon, at Portside U-shaped settee with table and at Starboard settee.

Cockpit with 2 wheels and cockpit table.

Teak (10mm) on benches

The yacht will be fully built according to CE-A (ocean class) regulation and will be delivered with the CE-A class certificate.

Bolts, nuts, washers and screws are generally stainless steel. Hose clamps are all stainless steel.

Walking paths laid with anti-slip, pattern diagonal placed.

Cockpit self-draining, 4 large stowage boxes in cockpit.

Lockable entry to salon with Plexiglas door. Cockpit table.

 

Detailed description:

Water resisting marine grade plywood used in all bulkheads and major joinery.

All main bulkheads bonded to hull and deck using glass mat and polyester.

Inside doors have high quality marine locks.

Ceiling, topsides and visible hull sides padded with special foam and backed with vinyl.

Cushions in high quality foam (10cm) with first class upholstery.

 

Mast and Rigging:

Main mast and boom from Selden Mast in furler 15,30 m long, with two levels of spreaders, boom and rod kicker. Furlex brand genoa furler.

Standing rigging: All stays and shrouds in stainless steel wire. Babystay divided in two side stays. Running rigging: 1 main halyard, 1 genoa halyard, 1 main sheet, 2 jib sheets.

 

Sail:

Main sail with rollreef system furling in the in mast. Genoa sail, rollreef system Total sail area 85,40 m2 (U.K. Sails). Delivered and installed ready for sailing with all the attachments needed.

 

Keel:

2.800 kg cast iron keel with weight bulb underneath. Epoxy treated.

 

Rudder:

Glass fibre rudder on solid stainless steel stock. (diameter 60 mm)

 

Steering System:

2 x 90 cm. diameter stainless steel steering wheel with lorica cover (wired system), 2 compass on both sides, depth and log indicators from Autohelm, acceleration lever located near steering wheel on SB side. Engine electricity panel and panel from Yanmar on PS side.

 


 

Engine:

53 Hp YANMAR 4JH5CE+SD diesel saildrive installed completely, inclusive 3 blade fixed propeller. Engine room fully isolated with foam. Engine controller and instrument panel in cockpit. Diesel tank stainless steel tank 150 litres ventilated. With electronic level indicator, filling from deck. 2x105 Amp/hour marine batteries with separator switch.

                                                      

Deck equipment:

2 railings(holders) on salon deck,

Stainless steel guardrail (25mm diameter, 2mm thickness).

Aluminium toe rail with 6 fairleads and 4 cleats. Pulpit and enlarged double seat on pushpit.

2 Self tailing winches 48 (Harken),

1 Self tailing winches 40 for the Mainsail on deck of salon (Harken)

1 winch handle.

Complete sheet traveller with slider and tag lines. (Harken)  

2 aluminium genoa tracks with rails. (Harken)

Electric anchor winch 1000 watt installed under deck, self draining chain locker. (Quick brand)

Cockpit shower.  

 

Windows:

1 hatches in forward cabin size 50.

1 hatches on deck size 41.

2 port lights size 20x40.

4 port lights size 25 x 50 at the sides, all openable.

Saloon: 3 large windows.

 

Galley:

2 burner gas stove with oven, half swinging. Gas bottle in the back. 90 lt. icebox with 12 volt Danfoss machine, with draining and separate cooling. Double stainless steel sink,

Draining directly through the hull and in grey water tank.  Drainage from grey water tank with 12 volt electric pump.

Electric pump for fresh water. 2 fresh water tanks totally 250 litres, ventilated, with electrical filling level indicator, filling from deck. 1 GRP Grey water tank of 60 litre for kitchen sink. 

 

Bathrooms:

Toilet installation: hand operated marine toilet from Jabsco with seawater intake and outlet into black water tank. One GRP black water tank (80 lt). Sink with tap and separate shower tap with electric pump all with draining through hull. Hot water system (optional). Electrical bilge pump and hand operated bilge pump. All inlets and outlets underneath or on the waterline with sea ventil.

 

Electrical installation:

Switchboard and control panel in navigator area

Salon: 4 halogen lamps 10 watt with switch in ceiling, 2 reading lights in forward cabin, owner cabin and in third cabin. 1 halogen lamp in both bathrooms. 2x105 amp marine batteries with both shelter and batteries state indicator.

 

Navigation:

Large navigation table with chart stowage. Switchboard control panel for all navigation lights, deck lights, electronics, fuse boxes etc. Navigation chair.

 

Gas:

2 x 4,95 litre gas bottle place in its own drained locker in the back of the cockpit.

 

Standard Electronics:

Raymarine tridata combined deep sounder and speed indicator except wind indicator.

 

Standard equipment:

2 Mooring lines

4 Fenders

1 Anchor 15 kg.  with 50 meter anchor chain

1 Instruction manual